Build and Animate a Robot in Snakie

Learn to build a robot in 3-D in Snakie from blocks and joints, pose and animate it, then drive it from MicroPython

By Kevin McAleer,    3 Minutes

Page last updated November 21, 2026


Course Cover Image


Overview

Snakie isn’t only a code editor. Its Build workspace is a small 3-D robot studio. You stack blocks into a robot, join them with hinges, drag the robot into poses, and string the poses into a motion. Then comes the best part: your MicroPython code moves the same 3-D model, with no hardware on the desk.

In this course you’ll build one robot from a blank floor: a three-joint desk arm with a waist, a shoulder and an elbow. You’ll pose it, animate it, bind a servo to each joint and write the code that makes it wave.

New to Snakie? Watch Kev’s introduction above first, then come back.


Course Content

  • A tour of the Build workspace and the files it keeps
  • Adding blocks and sizing, colouring and naming them
  • Joining blocks with the joint tool
  • Hinges, wheels and sliders, and the limits that keep them safe
  • Mass, balance, measuring and the skeleton view
  • Posing with sliders and by dragging the robot
  • Saving poses and building a motion from them
  • Fine control with joint tracks and keyframes
  • Binding servos to joints
  • Driving the 3-D arm from your own MicroPython
  • Exporting a motion as ready-to-run code
  • URDF files: exporting yours and opening other people’s
  • Rendering a movie of your robot

Key Results

After this course you will be able to:

  • Build a jointed robot model from boxes, tubes and balls
  • Choose the right joint type, axis and limits for each moving part
  • Save named poses and play them back as a looping motion
  • Tell Snakie which servo pin drives which joint
  • Run MicroPython on the simulated device and watch the 3-D robot follow it
  • Export the robot as a URDF file and open a URDF made elsewhere
  • Render a short video of your robot moving

What you’ll need

  • Snakie, either the desktop app or app.snakie.org in Chrome or Edge. The Build workspace saves its files in a project folder, so the browser needs to be one that can open folders.
  • Nothing else. The whole course runs on Snakie’s simulated device.
  • Optional: three hobby servos and a Raspberry Pi Pico, if you want to build the real thing afterwards.

It helps to have done Snakie - Getting Started so you know your way around, and Wire It Up - Electronics in Snakie if you plan to wire real servos.

This course was written with Snakie 0.92.0. Snakie changes quickly, so a button may have moved by the time you read this.


How the course works

Each lesson adds one thing to the same arm, so do them in order. Screenshots show exactly what to expect, there’s a Try it Yourself task in every lesson, and a short quiz at the end checks that the idea has stuck.

Snakie also has a short built-in course called Build a Robot in 3-D under the Learn button. This course goes further and builds a different robot, so the two work well together.

Next >

You can use the arrows  ← → on your keyboard to navigate between lessons.

Course complete

Congratulations, you finished Build and Animate a Robot in Snakie!

That's all 16 lessons done. Let people know, it's a great way to inspire someone else to start.

Share card: I completed Build and Animate a Robot in Snakie on KevsRobots
Post Bluesky LinkedIn Facebook


What are you looking for?
Watch Videos Get Ideas Learn Something Read a Review Read the Blog Search
... Z Z z