By Kevin McAleer, 4 Minutes
Page last updated November 21, 2026

You started with a board Snakie had never heard of. You finish with a part that draws itself, wires itself, checks its own voltage, installs its own driver and brings its own blocks. Nice work.
| Lesson | What you added |
|---|---|
| Board size and details | A 25 by 13 mm board with a name, family and tags |
| Pins | Six pins with types, capabilities and I2C signals |
| Holes, components and labels | The physical look of the board |
| Tracing a photo | A real picture, cleaned up and scaled |
| Schematic and electrical | A symbol, an I2C address and supply limits |
| Drivers and help | One-click driver install and offline help |
| Using your part | A wired project and derived blocks |
| Own blocks | A blocks.yml with blocks that read like a sentence |
| Microcontroller board | A custom board in the board selector |
| Sharing | A library, versions and the registry |
Here’s everything in the folder, and which lesson made it:
vl53l0x-distance-sensor/
parts.yml lessons 3 to 8
image.png lesson 6
help.md lesson 8
blocks.yml lesson 10
And here’s the program your blocks write, with a loop added so the robot keeps looking. As before, a stand-in sensor lets it run on this page. Press Run.
Pick a board from your parts drawer that Snakie doesn’t have, and make it. Good first choices:
Work through the checklist from the last lesson. When it’s good, share it.
Quick quiz 1 of 3
Which single file is the part itself?
Quick quiz 2 of 3
What should you set first when starting a new part?
Quick quiz 3 of 3
Which of these makes a part easier for other people to use?
You can use the arrows ← → on your keyboard to navigate between lessons.
Comments