Learn to add your own sensors, breakouts and microcontroller boards to Snakie with the Part Editor, drivers and custom blocks
By Kevin McAleer, 4 Minutes
Page last updated November 21, 2026
Overview
Snakie ships with around eighty parts: Picos, sensors, motors, batteries. Sooner or later you’ll hold a board in your hand that isn’t on the list. That’s where the fun starts, because Snakie lets you make the part yourself.
In this course you’ll build one complete part from a blank board: a VL53L0X laser distance sensor breakout. By the end it will sit in your library next to the standard parts. You’ll be able to drop it on the breadboard, wire it, install its driver with one click, and drag its very own blocks into a program.
New to Snakie? Watch Kev’s introduction above first, then come back.
Course Content
What a part really is: a folder with a parts.yml file in it
A tour of the Part Editor and its three views
Board size, colour and the details that make a part searchable
Pins: names, types, capabilities and the 2.54 mm grid
Mounting holes, component shapes and labels
Tracing a real board photo, with background removal
The schematic symbol, I2C addresses and electrical limits
Attaching a MicroPython driver and bundled help
Using your part in a project, and the blocks Snakie makes for it
Writing a blocks.yml so your part gets its own blocks
Turning a part into a microcontroller board
Sharing parts as a library
Key Results
After this course you will be able to:
Create a part in the Part Editor and save it to your My Parts library
Place and describe pins so Snakie can wire, check and label them
Turn a photo of a board into a clean, correctly sized part
Attach a driver so Snakie offers to install it when the part is used
Write a small blocks.yml that adds blocks for your part
Make a custom microcontroller board appear in the board selector
Package your parts as a library other people can install
What you’ll need
Snakie desktop app. You can open the Part Editor in the browser version to look around, but saving a part needs the desktop app, because parts are saved as files on your computer.
A board you’d like to add. We use a VL53L0X breakout, and you can follow along without owning one.
Optional: a ruler or calipers, and a photo of your board taken from straight above.
This course was written with Snakie 0.92.0. Snakie changes quickly, so a button may have moved by the time you read this.
How the course works
Each lesson adds one thing to the same part, so do them in order. Screenshots show exactly what to expect, there’s a Try it Yourself task in every lesson, and a short quiz at the end checks that the idea has stuck.
This is an intermediate course. You should already be comfortable wiring parts in the Electronics workspace. If not, start here:
Comments