KevsRobots Learning Platform
Build a SMARS Robot in Fusion 360
28% Percent Complete
Overview
Create the Base
Refine
Wheels
Motor Holders
Front
Wheel
Final Design
Chassis Wheel hole profile
Create the wheel holes
By Kevin McAleer, 1 Minute
The profile for the wheel holes is created next. This has 2 dimensions:
- Hole diameter = 4.5mm (the motor spindle is 3mm so this is plenty of clearance)
- Hole centre from edge and bottom = 8mm
You can use the arrows ← → on your keyboard to navigate between lessons.
Comments