By Kevin McAleer, 2 Minutes
Page last updated November 20, 2026

Well done! You’ve gone from opening Snakie for the first time to a traffic light that runs by itself on a Raspberry Pi Pico.
main.py makes it start at power-up| I want to… | Do this |
|---|---|
| Run my program | Press Run |
| Stop a program | Press Stop, or Ctrl+C in the console |
| Restart the board | Press Reset |
| Try a single line | Type it at the >>> prompt |
| See my pins | Look at the Board view and turn on Show pin labels |
| Put MicroPython on a board | Flash firmware in the status bar |
| Use a real board | Disconnect from the simulator, then connect to the board |
| Make a program run at power-up | Upload it as /main.py |
See Snakie in action, and hear why Kev built it:
Carry on along the Start with Snakie pathway:
And when you’re ready to build something that moves, try MicroPython Robotics Projects with the Raspberry Pi Pico.
You can use the arrows ← → on your keyboard to navigate between lessons.
Comments