By Kevin McAleer, 4 Minutes
Page last updated November 20, 2026

Snakie comes in two forms that look and work the same: a web app that runs in your browser, and a desktop app you install. Let’s pick the right one for you.
Go to app.snakie.org. That’s it. There is nothing to install, and it works on Windows, macOS, Linux and Chromebooks.
Snakie opens already connected to the Simulated device (offline), a pretend board that lives inside the app, so you can run MicroPython straight away.
To use a real board from the web app you need Chrome or Edge. Those browsers support Web Serial, which is how a web page talks to a USB device. Firefox and Safari can still run everything on the simulator.
The desktop app is the same Snakie, installed on your computer. It works in any setup, updates itself, and has a full set of application menus (File, Device, Tools and View).
Download the installer for your computer from the Snakie releases page:
| Your computer | File to download |
|---|---|
| Windows (x64) | Snakie.Setup.<version>.exe |
| macOS, Apple Silicon | Snakie-<version>-arm64.dmg |
| macOS, Intel | Snakie-<version>.dmg |
| Linux (x64) | Snakie-<version>.AppImage or snakie_<version>_amd64.deb |
| Raspberry Pi 4 or 5, 64-bit Pi OS | Snakie-<version>-arm64.AppImage |
The macOS builds are signed and notarized, so they open like any other app. The Windows and Linux builds are not signed yet, so Windows may ask you to confirm before it runs the installer.
On a Raspberry Pi the download is an AppImage: a single file you make executable and run.
chmod +x ~/Downloads/Snakie-*-arm64.AppImage
~/Downloads/Snakie-*-arm64.AppImage
An AppImage doesn’t add itself to the menu. To put Snakie under Programming with its icon, run the helper script once:
curl -fsSL https://raw.githubusercontent.com/kevinmcaleer/Snakie/master/scripts/install-linux-menu.sh -o install-linux-menu.sh
bash install-linux-menu.sh ~/Downloads/Snakie-<version>-arm64.AppImage
| Web app | Desktop app | |
|---|---|---|
| Install needed | No | Yes |
| Simulator | Yes | Yes |
| Real boards | Chrome or Edge only | Yes |
| Works offline | After the first visit | Yes |
| Application menus and shortcuts sheet | No | Yes |
| Updates | Automatic on reload | One click from the status bar |
If you’re just starting, use the web app. Everything in this course works there. Move to the desktop app when you want Snakie on a machine that isn’t always online, or you prefer menus and keyboard shortcuts.
The version number sits at the bottom right of the window, in the status bar. In the desktop app it turns into an Update button when a new release is out. In the web app Snakie suggests a reload, and it keeps your open tabs when you do.
Problem: The web app can’t see my board. Solution: Use Chrome or Edge, and check your USB cable carries data. Why: Only those browsers support Web Serial, and many cheap cables only carry power.
Problem: On Linux, double-clicking the AppImage does nothing.
Solution: Make it executable with chmod +x, as shown above.
Why: Downloaded files are not allowed to run until you say so.
Quick quiz 1 of 2
Which browsers can connect the Snakie web app to a real USB board?
Quick quiz 2 of 2
What does Snakie connect to when you first open it?
You can use the arrows ← → on your keyboard to navigate between lessons.
Comments