STL Download
An open-source 3d printable cube robot you can build yourself
Video
For every project I create, I often make a corresponding YouTube video. Sometimes, there might be more than one video for a single project. You can find these videos in this section.
Explore more through this this dedicated video.
The 3D Printed Parts
Cubie-3 has only a couple of 3D printable parts:
These are the:
- 4x motor holders. The motor holders are designed to fit the N20 150RPM motors, fixed using 2x M3 screws and nuts.
- Base
- Camera Holder (Front Top Panel)
- Lower Front Panel
- Lower Side Panel x2
- Upper Side Panel x2
- Top Spacer
- Top Back Panel
- Top Side Panel x2
- Top
- Pillar x4
- Shelf x1
3D Models
Here are the 3D printable STL files:
| Name | Comment | Download |
|---|---|---|
| Motor Holders | 4x required | Download |
| Base | No supports required | Download |
| Camera Holder (Front Top Panel) | print flat on its back with text pointing upwards | Download |
| Lower Front Panel | Download | |
| Lower Side Panel | 2x required | Download |
| Upper Side Panel | 2x required | Download |
| Top Spacer | Optional | Download |
| Top Back Panel | Download | |
| Top Side Panel | 2x required | Download |
| Top | Download | |
| Pillars | 4x required | Download |
| Shelf | 1x required | Download |
You can use the arrows ← → on your keyboard to navigate between lessons.