KevsRobots Learning Platform
40% Percent Complete
By Kevin McAleer, 2 Minutes
Now that OpenClaw is running, let’s access it and get it configured.
Open your browser and navigate to:
http://openclaw-pi.local:18789
Or your Pi’s IP address:
http://192.168.1.100:18789
You should see the OpenClaw dashboard.
OpenClaw generates a security token on first run. You’ll see something like:
Token: 8c4ccaa8e77b6bfdf25eeace15ac7da73498dc804a9589ec
Save this somewhere safe. You’ll need it if you need to reconnect.
To set up a proper password:
If you want to use Claude or other models:
Without API keys, you’re limited to local models only.
Start simple. Install:
You can add more later.
Let’s create your first agent:
Send a simple message:
Say hello and tell me a little about yourself
The agent should respond. If it does, everything is working!
Main areas:
Your OpenClaw is now running and configured. Next lesson covers managing your container and monitoring resources.
You can use the arrows ← → on your keyboard to navigate between lessons.
Comments