KevsRobots Learning Platform

Raspberry Pi Pico with MicroPython - GPIO Mastery

100% Percent Complete

Overview
Introduction to GPIO Pins
Digital I/O and PWM
Analog I/O (ADC)
UART, I2C, and SPI
Interfacing with Servos and Ultrasonic Range Finders
Ground Pins
Summary and Review

Recap and Review

A summary of what you have learned in the `Raspberry Pi Pico with MicroPython - GPIO Mastery` course.

By Kevin McAleer,    2 Minutes

Overview

Welcome to Lesson 17 of the Raspberry Pi Pico with MicroPython - GPIO Mastery course. In this lesson, we will review what you have learned in this course.

Course Content

In this course, you have learned:

  • What MicroPython is, why you should use it, where to download it, and which software to use to develop Python code
  • How to connect components to the Raspberry Pi Pico using different types of GPIO pins, including digital I/O, PWM, ADC, I2C, and SPI
  • How to write MicroPython code to control LEDs, motors, servos, and ultrasonic range finders
  • How to use potentiometers and temperature sensors with the Raspberry Pi Pico
  • The basics of using ground pins in your circuits

Key Results

After completing this course, you will have a solid understanding of the basics of using the Raspberry Pi Pico with MicroPython. You will be able to connect components to the board and control them using MicroPython code. You will also be able to use potentiometers and temperature sensors in your circuits, and understand the basics of ground pins.

What’s next?

Now that you have completed this course, you are ready to take your Raspberry Pi Pico and MicroPython skills to the next level. Here are some ideas for what you can do next:

  • Use your new knowledge to build your own circuits and projects
  • Explore more advanced topics in MicroPython, such as threading, interrupts, and networking
  • Learn more about electronics and circuit design to create even more complex projects

Thank you

Thank you for taking the Raspberry Pi Pico with MicroPython - GPIO Mastery course. We hope that you have learned a lot and enjoyed the course. If you have any feedback or suggestions, please let us know!

< Previous