Pi Stand v6 With Camera & HyperPixel support 22 February 2023 1 minute read By Kevin McAleer Share this article on Table of Contents v6 UpgradesCaptive NutNoteDownload the STLS and print todayOther Pi Stands Tags raspberry pi Pi Stand Stand Camera Stand Hyperpixel display 3D Printing
v6 Upgrades The new Pi 4 Stand features an integrated camera module holder, with a GoPro compatible mount point. This version of the stand is slightly wider than the previous version; this is to comfortably accomodate the Pimoroni HyperPixel 4.0 rectangular display. The stand is designed so that the display is central and the camera module is also centered above the screen. The Camera holder is adjustable so you can place this on a desk or workbench and point the camera at whatever you want to monitor. Captive Nut Youâll need to add an M4 nut and bolt to secure the Camera module holder to the stand. Note Please do not overtighten the nut as it will crush the 3d print and ruin the Pi Stand. Download the STLS and print today Download the files and print your own Pi Stand today. It has a couple of parts: Camera Holder Pi Stand v6 Other Pi Stands The other Pi stands are still available here.